Sheets

32/1000 Box Profile Roofing Sheets with a 0.7mm thickness provide a robust, strong roof covering. Incorporating 6 profiles 200mm apart, with a 32mm profiled height, PVC Plastisol Roofing Sheets feature a tough leather-grain finish and are available in a range of colours to suit your project.

Cladco 32/1000 Box Profile Sheeting gives robust strength with a thickness of 0.7mm. Also known as single-skin Box Profile Sheets, this Sheet incorporate 6 profiles of 200mm pitch and 32mm in height. Each Sheet gives a 1 metre width coverage when lapped. Please note that Polyester Paint Coated Sheets can be easily scratched, so care must be taken when handling/installing.

Our 32/1000 box profile, 0.7 thick galvanised roof sheets, sometimes referred to as single skin box profile sheets, are one of our most robust roofing sheets.

Incorporating 6 profiles of 200mm pitch across the sheet width and 32mm profile height, these are superb sheets for home or commercial use. Of all our box profile sheets, these are preferred by some due to their low profile and superb galvanised steel finish. They're made from a galvanised steel strip and give 1000mm actual width cover when lapped. Galvanised finishes are often favoured for traditional projects where no colour finish is required.

Our 0.5mm thick single skin box profile PVC roof sheets give robust strength roofing sheets. Incorporating 6 profiles of 200mm pitch across the width of the sheet and 32mm profile height the roofing sheets work in both a domestic and a commercial environment.

32/1000 Box Profile Polyester Paint Coated Roof Sheets are robust single-skin sheeting comprising 6 profiles 200mm apart across the width of the Sheet. With a 32mm profile height, our 32/1000 Box Profile Roofing Sheets are preferred by some for their low profile appearance. The high-quality, coated steel strip gives 1000mm actual width coverage when lapped and is available in a range of colours.

Cladco 32/1000 Box Profile 0.5mm thick Roofing Sheets are a popular choice among our selection of Roofing Sheets. Sometimes referred to as single-skin Box Profile Sheets, they are often used for side cladding on buildings. Incorporating 6 profiles of 200mm pitch across the Sheet width, with a 32mm profile height, these are superb Roofing Sheets for both home or commercial use.

34/1000 Box Profile Sheets are our most popular and strongest profiled Roofing Sheet, with each single-skin Sheet featuring seven profiles across its width. With a profile height of 34mm and a coverage of 1000mm when installed, PVC Plastisol 0.7mm Box Profile Roofing Sheets give a low-maintenance, scratch-resistant covering for your roof.

34/1000 box profile 0.7 thick polyester paint coated most popular sheets, with each single skin sheet having 7 strong 166mm profiles across its width. With a profile height of 34mm and coverage of 1000mm when installed, these 34/1000 box profile sheets give you a simple yet strong way to cover your build. Each 34/1000 box profile sheet will give your roof a secure weatherproof lap from sheet to sheet. Click Here to order a sample of our 34/1000 box profile polyester paint coated roof product.

34/1000 box profile 0.7 thick galvanised roofing sheets each single skin sheet having 7 strong 166mm profiles across its width. With a profile height of 34mm and coverage of 1000mm when installed, these box profile sheets give you a simple yet strong way to cover your build. Each 34/1000 box profile sheet will give your roof a secure weatherproof lap from sheet to sheet.

Our 34/1000 box profile 0.5 thick roofing sheets, sometimes referred to as single skin box profile sheets that give robust profile roofing sheets strength. Incorporating 6 profiles of 200mm pitch across the sheet width and 34mm profile height, these are superb roofing sheets for home or commercial use. Some users prefer the appearance of these galvanised box profile sheets as it has lower and fewer profiles. It’s made from a galvanised steel strip and gives 1000mm actual width cover when lapped.

34/1000 trapezoidal box profile sheeting is our most popular and strongest sheet, with each single skin sheet having 7 strong 166mm profiles across its width. With a profile height of 34mm and coverage of 1000mm when installed, these 34/1000 box profile sheets give you a simple yet strong way to cover your roof.

Each 34/1000 box profile sheet is formed from 1250mm wide steel strip which will give a secure weatherproof lap from sheet to sheet. A polyester paint coat on top of your choice of 0.5 or 0.7mm thick galvanised steel makes this our most cost-effective sheeting solution.

34/1000 box profile 0.5 thick galvanised roofing sheets are one of our most popular box profile sheets, with each single skin sheet having 7 strong 166mm profiles across its width. With a profile height of 34mm and coverage of 1000mm when installed, these 34/1000 box profile sheets give you a simple yet strong way to cover your build. Each 34/1000 box profile sheet will give your roof a secure weatherproof lap from sheet to sheet.

Cladco 13/3 Corrugated Roofing Sheets with a PVC Plastisol Coat feature 13 corrugations, each 3 inch/76mm. Corrugated Roof Sheets give a total width coverage of 990mm when installed. Galvanised Corrugated Roof Sheets are available in a range of colours and in 0.7mm thickness. Please note, we advise using the 65mm Screws with Baz Washers with these sheets.

These steel corrugated roof sheets give the look of a traditional 13/3 ‘corrugated iron’ profile and have 13 corrugations of 3 inch/76mm round, with a width coverage of 990mm when installed. They really do give the look of traditional ‘corrugated iron’ that has been used for over a century. Our corrugated roof sheets are available in a range of colours and 0.5 and 0.7mm thickness, with a polyester paint coat on top of the galvanised steel.

We advise the use of TEK screws with BAZ washer on our corrugated sheets as the BAZ washer creates a seal.

Cladco Profiles 0.7mm Galvanised Corrugated Roofing Sheets provide the same aesthetic as traditional, corrugated iron profiles. 13/3 Corrugated profile features 13 round corrugations, with a width coverage of 990mm when lapped. Corrugated Roofing Sheets are a cost-effective alternative to traditional roofing and cladding materials. We advise using 65mm Screws with Baz Washers to fix these Sheets to Purlins.

Giving the look of a traditional ‘corrugated sheet iron’, our 13/3 Corrugated 0.5 Thick PVC Plastisol Coated Roof Sheet has 13 corrugations of 3 inch/76mm round and each corrugated sheet will cover a width of 990mm when installed. Corrugated roof sheets really do give the look of traditional ‘corrugated sheet iron’ that has been used for over a century. Corrugated steel roof sheets are available in a range of colours and 0.5 and 0.7mm thickness, with a PVC Plastisol coat on top of the galvanised steel corrugated roofing. Please note, we advise using the 65mm Screw with Baz Washer with these sheets.

Our 13/3 Corrugated 0.5 Thick Polyester Paint Coated Roof Sheets give the look of a traditional 13/3 ‘corrugated iron cladding’ profile. They have 13 corrugations of 3 inch/76mm round, with a width coverage of 990mm when installed. This sheet gives the look of traditional ‘corrugated iron cladding’ that has been used for over a century for a traditional look. Our Corrugated Roofing Sheets are available in a range of colours and 0.5 and 0.7mm thickness, with a polyester paint coat on top of the galvanised steel. Please note, we advise using the 65mm Screw with Baz Washer with these sheets.

Cladco 13/3 Corrugated Pofile Sheets have been a popular choice in construction for over a century. Ideal for side cladding, 0.5mm Galvanised Sheets feature 13 corrugations of 3 inch (76mm) round, with a width coverage of 3ft 3inch (or 990mm) when lapped. We advise using the 65mm Screws with BAZ Washer to install these Sheets.

Often referred to as tile effect roofing sheets, these roof tile sheets are designed to look like an authentic pan tile roof. Made from the best quality steel available, our metal tile effect sheets really do give the appearance of traditional clay tiles. Using 0.6mm galvanised Swedish Steel, sheets are formed with a tough, hard-wearing GreenCoat® Mica BT coating. Flashings are available in the same coating and colours to complete your project.

Insulated Panels are manufactured as a single product with 40mm insulation and a pre-finished Goosewing Grey steel coating for a high-quality finish. Insulated Panels provide heightened noise retention and heat regulation along with fire-resistant benefits.

Cladco Galvansied Flat Sheets are available in 0.7mm thickness and approximately 1240mm wide. Flat galvanised roofing sheets are ideal for those wishing to make their own flashings or can be used on a variety of general purposes such as trailer beds, gates, walls, roofs, agriculture and more.

Cladco Polyester Flat Sheets are available in 0.7mm thickness and approximately 1240 wide. Flat Sheets are ideal for those wishing to make their own flashings or can be used on a variety of general purposes such as trailer beds, gates, walls, roofs, agriculture and more.

Cladco flat PVC roofing sheets are available in 0.7mm thickness and are approximately 1240mm wide. Flat PVC roofing sheets are ideal for those wishing to make their own flashings or can be used for a variety of general purposes, such as trailer beds, gates, walls, roofs, agriculture and more.

Cladco 3m high-quality, GreenCoat® Mica Flat Sheets can be used to create bespoke Flashings, trail beds and more, manufactured from Galvanised Steel with a range of additional benefits. 

Cladco Valley Edge Plate Flashing provides a raised profile edge to secure Standing Seam Roofing Sheets at valley sections. Manufactured from SSAB Swedish quality steel, and finished with an eco-friendly GreenCoat® Pural BT coating. Available in 3m lengths and four colour options.