Roof Sheet Calculator

When it comes to ordering the right products for your roofing project, we don’t want to leave you guessing where to start, especially if you’re encountering your first roofing project using Cladco Profiles roofing sheets. Below are the two most popular roof types, we’ll guide you through our roof sheet calculator, showing a guide on how many sheets to order, what flashings and accessories you may need, including the screws, and will give you the total cost of your potential project. Simply fill in the measurements and choose from the multiple choice options to guide you through each stage of our metal roof calculator. Then, if you’re happy with the order summary, either add to basket and complete your order, or email the quotation to yourself to return to later. You can call us on 01837 659901 or email us at a [email protected]. We aim to respond within an hour, during office hours of 8-5 Monday to Friday, or 8-1 on Saturdays.

Step 1: Select Roof Type

Apex

Single Slope

Step 2: Enter your measurements

Set A
A Metres	B Metres
Set B
C Metres	D Metres

Metres

Unable to quote...

Sorry! we are unable to quote for this. Please fill out your details in the form to request a call back or call us on our customer helpline 01837 659 901.

Full Name *

Phone Number *

Email Address *

Comments

Step 3: Choose your profile

Please note roof sheets and flashings have very sharp edges, please handle with care , even when using protective gloves

32/1000

34/1000

13/3 Corrugated

Tile Form

Box Profile 32/1000 Sheets (for roofing and cladding)

Prices from £7.68 up to £11.70 per m2

Lighter with a lower profile and attractive appearance

Cladco Profiles 32/1000 trapezoidal, sometimes referred to as box profile single skin sheet gives robust sheet strength with 6 profiles of 200mm pitch across the sheet width and 32mm profile height. Some users prefer the appearance of this profile as it has lower and less profiles. It's made from coated steel strip and gives 1000mm actual width cover when lapped.

Box Profile 34/1000 Sheets (for roofing and cladding)

Prices from £7.68 up to £11.70 per m2

A strong sheet often used for agricultural buildings, garages and sheds

Cladco Profiles 34/1000 box profile, with its 7 ribs, 34mm deep profile sections, this single skin sheet is our strongest and can be used on roofs and a minimum pitch of 4 degrees. It's made from coated steel strip and gives 1000mm actual width cover when lapped.

13/3 Corrugated Sheeting (for roofing and cladding)

Prices from £7.68 up to £11.70 per metre

This type of sheeting gives a more traditional finish roof and wall cladding.

13/3 corrugated sheeting can be made up to 6 metres in length and gives a width coverage of 990mm when lapped. This sheet isn’t quite as strong as the 34/1000, as the profile sections are smaller, so we recommend using closer purlin support.

41/1000 Tile Sheet (roofing only)

Prices from £15.30 per metre

If you’re looking for a pan-tiled appearance without the fuss.

The 41/1000 tile-sheet is the perfect option, and provides a lapped width of 1-metre and is available in lengths of up to 6-metres.

Choose Your Thickness

0.7mm - 0.7mm is recommended for roofing sheets

0.5mm - 0.5mm is generally used for side cladding

Choose Your Finish

Polyester Paint Finish

Polyester sheets will typically last 8-12 years (weather conditions dependant) before the first maintenance is required. This is a less durable finish and therefore may scratch or scuff if care is not taken when handling.

PVC Finish

PVC sheets will typically last 15-25 years (weather conditions dependant) before the first maintenance is required. These sheets have a high resistance to scratching thanks to the leather grain coating.

Galvanised Finish