Steel Barge Flashings for your Roofing Project
Cladco Corner Barge Flashings are manufactured from multi-layered, galvanised steel and cut to 3m lengths. Flashings are folded to give a 90-degree internal angle that can flex 10-15 degrees either way depending on your needs. Barge Flashings come with a 10mm safety welt to increase the strength of the Flashing.
Corner Barge Flashings are used at the end of a run of sheets to trim and seal off the edge of a roof. If you require bespoke Flashings, please see our Custom-Made Flashings and we will aim to accommodate you requirements, wherever possible.
Cladco GreenCoat® Mica Flashings come in various colours to suit your Tile Form roofing project. Flashings are a necessary part of any profiled clad building. With the range and colours that are available, you can enhance the aesthetics of any structure.
Each 90 degree Corner Flashing can be fixed to Tile Form Roofing Sheets using 22mm Stitcher Screws. Read our Flashings Installation Guide for more information.
Cladco Corner Barge Flashings are also available inGalvanised, PVC Plastisol, Polyester Paint coatings.
It is advised that these Flashings are only installed alongside our 41/1000 Tile Form Roofing Sheets.
Please note: These 200mm x 200mm Barge Flashings give a coverage of 190mm x 190mm due to the 10mm safety welt.
