About our 3m Corner Barge Flashings in PVC Plastisol
Cladco Corner Barge Flashings are manufactured from high-quality, galvanised steel and are available in 3-metre lengths. PVC Plastisol Coated Corner Flashings feature a scratch-resistant leathergrain finish, cut to 150mm x 150mm width with a 10mm safety welt.
Corner Flashings are folded to a 90-degree internal angle and can flex by 10-15 degrees each way depending on your requirements. In most cases, our Flashings can be produced to fit your exact specifications.
All Corner Barge boards come with a 10mm safety welt to improve the strength of the Flashing. Secure to the roofing sheet below by stitching them using 22mm Stitcher Screws. Allow for a minimum 200mm overlap when securing Barge Flashings end-on-end.
Cladco Flashings can be used at the end of a run of steel Roofing Sheets to trim and seal off the edges of a roof or side cladding project. Read our Flashings Installation Guide for more information.
These Flashings are only recommended for use with our 13/3 Corrugated, 32/1000 Box Profile and 34/1000 Box Profile Roofing Sheets.
Please note: 150mm x 150mm Barge Flashings give a coverage of 140mm x 140mm due to a 10mm safety welt.
